$76 PW-HT226P2IR 1x2 HDMI Extender Splitter with Dual IR [email protected] Electronics Accessories Supplies Audio Video Accessories PW-HT226P2IR 1x2 HDMI Extender Splitter Free shipping IR [email protected] with Dual $76 PW-HT226P2IR 1x2 HDMI Extender Splitter with Dual IR [email protected] Electronics Accessories Supplies Audio Video Accessories IR,Electronics , Accessories Supplies , Audio Video Accessories,with,Extender,/diphtheria303119.html,$76,softwarespice.com,HDMI,1x2,[email protected],Dual,PW-HT226P2IR,Splitter PW-HT226P2IR 1x2 HDMI Extender Splitter Free shipping IR [email protected] with Dual IR,Electronics , Accessories Supplies , Audio Video Accessories,with,Extender,/diphtheria303119.html,$76,softwarespice.com,HDMI,1x2,[email protected],Dual,PW-HT226P2IR,Splitter

PW-HT226P2IR 1x2 HDMI Extender Manufacturer regenerated product Splitter Free shipping IR 1080P@60Hz with Dual

PW-HT226P2IR 1x2 HDMI Extender Splitter with Dual IR [email protected]

$76

PW-HT226P2IR 1x2 HDMI Extender Splitter with Dual IR [email protected]

|||

Product description

HDMI EXTENDER/SPLITTER 1X2

Change the mode of audio and video signals for longer distance transmission, HDMI IN --- CAT X --- HDMI OUT. 2-channel simultaneous transmission.

Specifications:

1.Video

◇ Standards---HDMI 1.3

◇ Maximum pixel clock---165MHz

◇ Maximum data rate---6.75Gbps

◇ Resolution---Max [email protected], 3D

◇ Connector---HDMI-A

2.Ethernet

◇ Interface---RJ45

◇ Recommended max distance---CAT6/7---60m/196ft; CAT5E---50m/165ft; CAT5-40m/130ft. When the Ethernet cable is between 1~10 feet, it may have no image, please try another longer cable for testing.

3.IR

◇ Interface---3.5mm

◇ IR frequency---20~60KHz

4.Others

◇ Power adapter---Input: 110~220V; Output: 12V/1A

◇ Power dissipation---MAX 12W

◇ Temperature---Operating: -5℃ ~ +70℃

◇ Humidity---Operating: 5% ~ 90%

◇ Dimension---TX:150*71*23mm / RX:81*45*23

◇ The warranty---1 year free warranty

5. Packing list

◇ HDMI transmitter---1 pcs

◇ HDMI receiver---2 pcs

◇ IR TX cable---3 pcs

◇ IR RX cable---3 pcs

◇ Power adapter---1 pcs

◇ Manual---1 pcs

About EDID

When the EDID cannot automatically identify the monitor parameters, the image may not be displayed, please perform the following steps.

(1) Connect the monitor to the HDMI IN on transmitter.

(2) Connect the power supply to transmitter.

(3) Press and hold the EDID button for 3-5 seconds. The green light on transmitter side stops flashing, indicating EDID copy is complete.

 

Last but not least, if have any product problems, please feel free to contact us on Amazon.

PW-HT226P2IR 1x2 HDMI Extender Splitter with Dual IR [email protected]